Hydraulic pump station suction port flow rate requirements and how to get the lifting platform

Hydraulic pump station suction port flow rate requirements and how to get the lifting platform

1, it is in the product purchase and use which one is more important?

In its product selection and product use, these two are not comparable, because they are the same in importance, there is no difference between the two, so the two can not be compared. In addition, from another point of view, this comparison has no meaning and value, do not need to carry out this work.

2, how to get a lifting platform through it?

Want to get through it to lift the platform, the specific measures are: first, the use of solenoid valves and hydraulic cylinders, it will be used as a lifting platform for the implementation of the device; the second is a switch to control the solenoid valve, and then through the solenoid valve to control the direction of the movement of the hydraulic cylinder, which can be used to control the lifting platform lifting movement. In addition, if there are some specific requirements, you can also draw the relevant wiring diagram to avoid mistakes.

3, its suction port flow rate value to be suitable?

The answer to this question is yes, that is, in the hydraulic pumping station, the suction port flow rate value is to be suitable, can not be the wrong value or value is not suitable, because this will affect its normal use and its use of the role, at the same time, it will also bring some other bad effects and consequences. Based on the above, it can be known that the answer to this question is yes.